Kyoritsu KEW 2413R Leakage Clamp Meter

Kyoritsu KEW 2413R Leakage Clamp Meter • Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires ( 3 phases) together for leakage current measurement. • True RMS enables an accurate measurement for distorted waveforms. • Measurement from mA up to AC 1000A • Frequency filter switch to eliminate the effect of the harmonics. • 2 way analogue output terminal: AC current detected by transformer jaws is converted to AC and DC voltage. Output cord model 7073 ( option) is used for monitoring waveform with an oscilloscope or for connecting to a recorder. Specifications AC A( 50/ 60Hz) : 200mA/ 2/ 20/ 200/ 1000A | ± 2.5% rdg± 5dgt ( 200mA/ 2/ 20A) | ± 3.0% rdg± 5dgt ( 200A, 0~ 500A) | ± 5.5% rdg ( 501~ 1000A) AC A( WIDE) : 200mA/ 2/ 20/ 200/ 1000A | ± 1.8% rdg± 5dgt ( 50/ 60Hz) ( 200mA/ 2/ 20A) | ± 2.0% rdg± 5dgt ( 50/ 60Hz) ( 200A, 0~ 500A) | ± 5.0% rdg ( 50/ 60Hz) ( 501~ 1000A) Conductor Size: Ø 68mm max. Frequency Response: 40Hz~ 1kHz Output: • Waveform: AC200mV against the maximum value of each range ( 1000A range is 100mV) • Recorder: DC200mV against the maximum value of each range ( 1000A range is 100mV) Crest Factor: 3.0 or less Withstand Voltage: 3700V AC for 1 minute Applicable Standard: IEC 61010-1 CAT.III 300V Pollution degree 2 IEC 61010-2-032 Power Source: 6F22 ( 9V) × 1 * Continuous measuring time: Approx. 60 hours Dimensions: 250( L) × 130( W) × 50( D) mm Weight: Approx. 570g ( including battery) Accessories: 9094 ( Carrying Case) , 6F22 × 1, Instruction Manual Optional: 7073 ( 2WAY Output Cord)